This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Mod_bus problem
#5
Do not use read_offset and set datatype to int32. You might need to set read_swap depending on byte/word order of your Modbus device. The easiest way to check it is to use RTU read test in Modbus tab. Also consider using float32 for bus_datatype since float16 has limited precision range and does not work well for large values.
Reply


Messages In This Thread
Mod_bus problem - by tormod@hoyemweb.no - 23.01.2018, 09:25
RE: Mod_bus problem - by admin - 23.01.2018, 10:48
RE: Mod_bus problem - by tormod@hoyemweb.no - 23.01.2018, 13:01
RE: Mod_bus problem - by tormod@hoyemweb.no - 23.01.2018, 14:24
RE: Mod_bus problem - by admin - 24.01.2018, 07:13

Forum Jump: