This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Group Address massive change
#1
Hi,

Is there any way to change names and group address from objects to replicate projects?

For example on an office building where there is LM on each floor, we need to have the same visualitzation, .... but KNX addresses are different:

   Logic Machine1                                                             Logic Machine 2                                                             Logic Machine N
   1/5/1 -->Floor01.Office1.Real_Temperature                     2/5/1 -->Floor02.Office1.Real_Temperature                      N/5/1 -->Floor02.Office1.Real_Temperature
   1/5/2 -->Floor01.Office1.Setpoint                                   2/5/2 -->Floor02.Office1.Setpoint                                     N/5/2 -->Floor02.Office1.Setpoint
    .....                                                                             .....                                                                               .....
   1/5/21 -->Floor01.Office2.Real_Temperature                    2/5/21 -->Floor02.Office2.Real_Temperature                   N/5/21 -->Floor02.Office1.Real_Temperature
   1/5/22 -->Floor01.Office2.Setpoint                                  2/5/22 -->Floor02.Office2.Setpoint                                  N/5/22 -->Floor02.Office1.Setpoint
    .....                                                                             .....                                                                               .....

The aim is to have, for example, Floor 1 project done and then import it to Floor 2 LM and change all group addresses whitout relink them to visualitzation objects, modbus mappings, ...

Thanks.
Reply


Messages In This Thread
Group Address massive change - by jmir - 17.08.2021, 05:42
RE: Group Address massive change - by admin - 18.08.2021, 06:44

Forum Jump: