modbus variable with 4 memory locations

[camilo]

hi.

I currently have a meter that has a modbus variable with 4 memory locations, someone knows how I can convert that variable to 32 bit format or higher

Code:

-- init modbus on first script execution
if not mb then
    require('luamodbus')
    mb = luamodbus.rtu()
    mb:open('/dev/ttyS2', 9600, 'E', 8, 1, 'H')
    mb:connect()
end

-- sets slave ID to read/write data from/to
mb:setslave(20)

-- read 3-phase system voltage from 32-bit register
r1, r2 = mb:readregisters(0x1000, 2)
result = bit.lshift(r1, 16) + r2
grp.write('5/5/1',result)

-- read 3-phase system current from 32-bit register
r1, r2 = mb:readregisters(0x100E, 2)
result = bit.lshift(r1, 16) + r2
grp.write('5/5/2',result)

I was looking at this example, but I can not find out how I can do it 

thank you

[admin]

For ModBus the recommended approach is to use mapper with profiles. It supports all kind of numeric values up to 64 bits.

[camilo]

Well, I'm new to this, you can explain to me how I could do that or if there is an example that I can take as a reference.

[admin]

Check this thread: https://forum.logicmachine.net/showthread.php?tid=839