cyclic time generator

[davidchispas]

Hello,

I need to create a script that when '1/1/1' is "on" it starts a cyclic generator of time of 'on' and 'off' parameterizable.
When '1/1/1' is Off, the cyclic generator is reset and the output is Off.

[Daniel]

Hi
Use event script on 1/1/1 to enable/disable a resident script which will send what you need.
BR

[davidchispas]

Hi
Use event script on 1/1/1 to enable/disable a resident script which will send what you need.
BR

Thanks Daniel, you can provide me with an example that I did not find in the search engine, or help me with the script.
1/1/1 - Activate sequence
1/1/2 - Time value activated
1/1/3 - Time value disabled
1/1/4 - Output object

[Daniel]

What does the tow objects:
1/1/2 - Time value activated
1/1/3 - Time value disabled
Supposed to be doing?

[davidchispas]

What does the tow objects:
1/1/2 - Time value activated
1/1/3 - Time value disabled
Supposed to be doing?

In these integer value objects, I enter a time in minutes.

I need to create a cyclic send of different on / off values. For example, 10 minutes on / 30 minutes off. This sequence is continuous while 1/1/1 is enabled, when changing everything is off.

[Daniel]

Event script attached to 1/1/1

Code:

value = event.getvalue()

if value then
  script.enable('cycle_scriptname')
else
  script.disable('cycle_scriptname')
end

cycle_scriptname replace with a name of resident script.

Resident script of interval 60s

Code:

timerOn = grp.getvalue('1/1/2')

timerOff = grp.getvalue('1/1/3')

onCounter = storage.get('onCounter', 0)
offCounter = storage.get('offCounter', 0)


onCounter = onCounter +1
offCounter = offCounter +1
log(onCounter,offCounter)

if onCounter >= timerOn then
  grp.write('1/1/4', true)
  storage.set('onCounter', 0)
else

storage.set('onCounter', onCounter)

end

if offCounter >= timerOff then
  grp.write('1/1/4', false)
  storage.set('offCounter', 0)
else
  storage.set('offCounter', offCounter)
end

BR

[davidchispas]

Code:

value = event.getvalue()

if value then
  script.enable('cycle_scriptname')
else
  script.disable('cycle_scriptname')
end

Code:

timerOn = grp.getvalue('1/1/2')

timerOff = grp.getvalue('1/1/3')

onCounter = storage.get('onCounter', 0)
offCounter = storage.get('offCounter', 0)


onCounter = onCounter +1
offCounter = offCounter +1
log(onCounter,offCounter)

if onCounter >= timerOn then
  grp.write('1/1/4', true)
  storage.set('onCounter', 0)
else

storage.set('onCounter', onCounter)

end

if offCounter >= timerOff then
  grp.write('1/1/4', false)
  storage.set('offCounter', 0)
else
  storage.set('offCounter', offCounter)
end

Thanks Daniel, I'm testing it but I can't get it to work properly. I have set 1 minute on and 2 minute off.

I have temporarily changed 1/1/4 to 0/5/3.

   

[Daniel]

I left you the log which shows the counting for on and off. For testing change the script interval to 10. It will then run tomerOn x 10s instead of 60s. Make sure you change 1/1/4 in both places.

---

Add to event script under else condition
storage.set('offCounter', 0)
storage.set('onCounter', 0)

so the counter is rested after disabling it.

[davidchispas]

I left you the log which shows the counting for on and off.  For testing change the script interval to 10.  It will then run tomerOn x 10s instead of 60s. Make sure you change 1/1/4 in both places.

---

Add to event script under else condition
storage.set('offCounter', 0)
storage.set('onCounter', 0)

so the counter is rested after disabling it.

Hi Daniel, I had to modify in the resident script to send the opposite value for it to work correctly.
if onCounter> = timerOn then
  grp.write ('1/1/4', false)
  storage.set ('onCounter', 0)

Anyway, I would like to thank you for your indications that have been of great help to me! 

In the end it has remained like that, I share it in case someone is of help.

Code:

AddressOutput = '1/1/4'  -- 01. 1 bit (boolean)

StatusCounterOn = '1/1/5' --05. 1 byte unsigned integer

StatusCounterOff = '1/1/6' --05. 1 byte unsigned integer

CounterOn = 'onCounter_Test'

CounterOff = 'offCounter_Test'

Script = 'Test'


----------------------------------------------------------------------------------

value = event.getvalue()

if value then
  script.enable(Script)
else
  script.disable(Script)
  sleep(2)
  grp.checkwrite(AddressOutput, false)
  storage.set(CounterOn, 0)
  storage.set(CounterOff, 0)
  grp.checkwrite(StatusCounterOn, 0)
  grp.checkwrite(StatusCounterOff, 0)
--Opcional
  sleep(2)
  storage.delete(CounterOn)
  storage.delete(CounterOff)
end

Code:

--Script resident (60s)

AddressInput= '1/1/1' -- 01. 1 bit (boolean)

timerOn = '1/1/2' --05. 1 byte unsigned integer

timerOff = '1/1/3' --05. 1 byte unsigned integer

AddressOutput= '1/1/4' -- 01. 1 bit (boolean)

StatusCounterOn = '1/1/5' --05. 1 byte unsigned integer

StatusCounterOff = '1/1/6' --05. 1 byte unsigned integer

----------------------------------------------------------------------------

onCounter = storage.get('onCounter_' .. _SCRIPTNAME, 0)
offCounter = storage.get('offCounter_' .. _SCRIPTNAME, 0)

if grp.getvalue(AddressInput) and grp.getvalue(AddressOutput) then
onCounter = onCounter +1
end

if grp.getvalue(AddressInput) and not grp.getvalue(AddressOutput) then
offCounter = offCounter +1
end

log(onCounter,offCounter)

if onCounter >= grp.getvalue(timerOn) then
  grp.write(AddressOutput, false)
  storage.set('onCounter_' .. _SCRIPTNAME, 0)
else
  storage.set('onCounter_' .. _SCRIPTNAME, onCounter)
end

if offCounter >= grp.getvalue(timerOff) then
  grp.write(AddressOutput, true)
  storage.set('offCounter_' .. _SCRIPTNAME, 0)
else
  storage.set('offCounter_' .. _SCRIPTNAME, offCounter)
end
 
grp.checkwrite(StatusCounterOn, onCounter)
grp.checkwrite(StatusCounterOff, offCounter)