This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

[OLD] LogicMachine firmware 2023.04
#1
See LM firmware 2023.06: https://forum.logicmachine.net/showthread.php?tid=4816
#2
Hi Admin,
Thanks for your and all EMBS team work.
Is it possible have a change log of the updates?
Best regards Cristian
#3
Check changelogs for RC firmwares:
https://forum.logicmachine.net/showthread.php?tid=4424
https://forum.logicmachine.net/showthread.php?tid=4530
https://forum.logicmachine.net/showthread.php?tid=4572
https://forum.logicmachine.net/showthread.php?tid=4637
#4
After upgrading LM5 Lite + Ext (i.MX6) i get no 1-wire tab and the following error:

Resident script:2: module 'ow' not found:
no field package.preload['ow']
no file './ow'
no file 'Library ow'
no file 'Library ow'
no file 'Library ow.so'
stack traceback:
[C]: in function 'require'

I have an usb to 1-wire interface

Solved: For LM5 install libow, owserver, luaow and genohm-scada-w1 packages
#5
This is correct, now if LM does not have a real output for a package then it ia not installed. You can install it manually from additional packages.
------------------------------
Ctrl+F5
#6
Hi there,

I tried to upgrade my LM4 from firmware version 20211215 to 20230420.

I used Google Chrome on macOS and selected the firmware "lm4-20230420.img" under "Upgrade firmware" in "System config."

The upgrade finished without error messages, but even after clearing all browsing data I'm still stuck on version number 20211215.

It's almost as if I reinstalled version number 20211215.

Is the firmware upgrade to versionĀ 20230420 for LM4 on openrb.com broken?

Any ideas how to best proceed from here?

Thank you,


-Bernd
#7
Your LM micro SD card became read-only and must be replaced. Follow this guide: https://openrb.com/reflash-logicmachine3...-software/


Forum Jump: