turn lights with double pulse in a switch

[JoseJimenez94]

Hi guys,

I have been testing our colleague's solution (https://forum.logicmachine.net/showthrea...ount+pulse) to be able to turn on two different lights with the same button using a single pulse or double pulse, but I can't get it to work properly (and I don't know if there is something I haven't understood well)

I have created a resident script (sleep interval 0), where the address 16/1/1 is the press that I make on the button, the addresses 1/1/10 and 1/1/120 are the lights and the address 16/1/2 is an address that I have created to perform the count
:

Code:

if not client then
  require('genohm-scada.eibdgm')
 
  -- knx group write handler
  function groupwrite(event)
    local value
    value = knxdatatype.decode(event.datahex, dt.bool)
    --first room
    if event.dst == "16/1/1" then
      switcher("16_1_1", "1/1/10", "1/1/120", "16/1/2", value)
    end
  end
 
  client = eibdgm:new()
  client:sethandler('groupwrite', groupwrite)

  function switcher(event_adress, light1, light2, counter_object, value)
    nowTIME = os.time()
    counter = grp.getvalue(counter_object)
    state = value
    if (state == false) then
      counter = counter + 1
      log(counter)
      lastONtime = storage.get('lastONtime' .. event_adress)
      if (nowTIME - lastONtime > 1) then
        log('long press ' .. event_adress)
        grp.write(light1, false)
        grp.write(light2, false)
        grp.update(counter_object, 0)
      else
        grp.update(counter_object, counter)
      end
    else
      storage.set('lastONtime'  .. event_adress, nowTIME)
    end   
  end
end

client:step()

And also at address 16/1/2 I have created the following event script:

Code:

value = tonumber(event.datahex, 16)

if value > 0 then
  light1 = '1/1/10'
  light2 = '1/1/120'
  switcher_adress = '16/1/1'

  os.sleep(1)
  value = event.getvalue()

  if value == 1 then
    log('single press '.. switcher_adress)
    grp.write(light1, not(grp.getvalue(light1)))
  elseif value == 2 then
    log('double ' .. switcher_adress)
    grp.write(light2, not(grp.getvalue(light2)))
  end

  -- reset counter
  if value > 0 then
    grp.update(event.dst, 0)
  end
end

The problem is that I can't get it to turn on the corresponding lights by giving it a single pulse or two, but nevertheless there are times when I do a short press, it interprets that I have done a long press and turns off the lights or when I try to do a double press , it interprets that I have done one or that I have done a long press (that is, it does different things each time). I can't find what the problem is.

I hope you can help me. Thank you so much

[admin]

See this: https://kb.logicmachine.net/scripting/si...ble-press/