Zigbee integration

[Alexander]

I’m not finished yet. How can I use this script as an event-based script and write the retrieved value to a group address?

[RomansP]

Hi, use a scheduled script that polls the data as often as needed

Code:

local zb = require('applibs.zigbee') local ieee = 'f4ce36e12b9esa24' local res, err = zb.cmdsync('getnamedattributes', ieee, 'HaElectricalMeasurement', {'RmsVoltage'}) log(res) log(err) if res then   local rmsVoltage = res.RmsVoltage   grp.checkwrite('37/1/3', rmsVoltage) -- 37/1/3 your group address end res, err = zb.cmdsync('getrawattribute', ieee, 0xFEE7, 0x0010) log(res) log(err) local total_active_energy = res if total_active_energy then   total_active_energy = total_active_energy / 1000 -- to get kWh   grp.checkwrite('37/1/4', total_active_energy) -- float value end

[Alexander]

Hi, use a scheduled script that polls the data as often as needed

Code:

local zb = require('applibs.zigbee') local ieee = 'f4ce36e12b9esa24' local res, err = zb.cmdsync('getnamedattributes', ieee, 'HaElectricalMeasurement', {'RmsVoltage'}) log(res) log(err) if res then   local rmsVoltage = res.RmsVoltage   grp.checkwrite('37/1/3', rmsVoltage) -- 37/1/3 your group address end res, err = zb.cmdsync('getrawattribute', ieee, 0xFEE7, 0x0010) log(res) log(err) local total_active_energy = res if total_active_energy then   total_active_energy = total_active_energy / 1000 -- to get kWh   grp.checkwrite('37/1/4', total_active_energy) -- float value end

Thanks again!