Trends API

[buuuudzik]

Is there an API for a new trends mechanism? e.g. for using some average values in scripts?

[Habib]

Hi buuuudzik,

I think it must be possible for own values made them via script to write them in new "virtual" GA's, which you can log for trends. So I made it with custom values.

[Erwin van der Zwart]

Hi buuuudzik,

Try this:


require('trends')
name = 'my trend name'
dates = {}
dates['start'] = { year = 2016, month = 4, day = 12 }
dates['end'] = { year = 2016, month = 4, day = 13 }
-- resolution (in seconds) is optional
-- default trend resolution is used when not set
resolution = nil
res = trends.fetch(name, dates, resolution)

log(res)
BR,
Erwin

[admin]

Docs:
http://openrb.com/docs/trends-new.htm

[buuuudzik]

Docs:
http://openrb.com/docs/trends-new.htm

Thank you everyone, especially you admin, because this is exactly what I was looking for

[Erwin van der Zwart]

Here is a script to create trends as batch from start address until end address for new (and relaese candidate) FW.

Code:

-- Batch adding trends - Created by Erwin van der Zwart - Schneider Electric Netherlands -----------
-- For spaceLYnk FW 1.2.1 or higher and homeLYnk FW 1.5.1 or higher --------------------------------
-- Refresh browser after creation to show the trends -----------------------------------------------
----------------------------------------- Start Parameters -----------------------------------------

-- Start address of objects
start_objectaddress = '1/1/1'

-- Trends for all objects between these range are created

-- End address of objects
end_objectaddress = '1/1/3'

-- Set username and password for access to HL
username = 'admin'
password = 'admin'

-- Select trend type to create (or multiple types on same object)
create_trendtype_counter = true
create_trendtype_counter_with_negative_delta = true
create_trendtype_absolute_value = true

-- Set trend precicion (!Important! Can only be these values: 0 to 8)
trendprecision = 2

-- Set trend resolution (!Important! Can only be these values: 5 / 10 / 15 / 20 / 30 / 60 minutes))
trendresolution = 5

-- Set trend count resolution (!Important! Can only be these values: '30' = 30 days, '180' = 180 days, '365' = 1 year, '730' = 2 years, '1825' = 5 years
trendcountresolution = 365

-- Set trend count days (!Important! Can only be these values: '1' = 1 year / '2' = 2 years / '5' = 5 years / '10' = 10 years)
trendcountdaily = 10

-- Set show always 0 base line
trendshowzero = 0 -- 0 = disabled 1 = enabled

------------------------------------------ End Parameters ------------------------------------------
------------------------------ DON'T CHANGE ANYTHING UNDER THIS LINE -------------------------------
-- Load modules
require('json')
require('socket.url')
require('socket.http')

-- Set HL ip address as localhost
ip = '127.0.0.1'

-- Calculate start address to DB format
start_objectaddress = knxlib.encodega(start_objectaddress)

-- Calculate end address to DB format
end_objectaddress = knxlib.encodega(end_objectaddress)

-- Create url for trend creation
url = 'http://' .. username .. ':' .. password .. '@' .. ip .. '/scada-main/trends/save'

-- Function to send request to create trend
function url_send(trend_object, trend_name, trend_type, trend_resolution, trend_precision, trend_count_resolution, trend_count_daily, trend_show_zero, trend_id)
 local trend = {
     object = trend_object,
     name = trend_name,
     type = trend_type,
     resolution = trend_resolution,
     precision = trend_precision,
   count_resolution = trend_count_resolution * 12 * 24, -- nr of days * nr of points in a hour at min resolution (60/5 = 12) * hours per day
   count_daily = trend_count_daily * 365, -- nr of days * 365 days a year
     show_zero = trend_show_zero,
     id = trend_id,
    }
 data = json.encode(trend)
    form_data = 'data=' .. socket.url.escape(data)
    socket.http.TIMEOUT = 15  
    local res, code, response_header = socket.http.request(url, form_data)
 return res, code, response_header
end

-- Set counters for creation log
number_of_trends = 0
number_failed = 0

-- Loop from startadres to end address to create trends
for i = start_objectaddress, end_objectaddress, 1 do
 
 -- Get current group address from loop
 current_GA = knxlib.decodega(i)
 
 -- Get current object info
 objectinfo = grp.find(current_GA)
    
 -- Check if object excists
 if objectinfo ~= nil then
     
   -- Set parameters for request
   trendobject = objectinfo.id
   trendname = objectinfo.name
   trendid = ''
   
   -- Check if trend type 'Counter' should be created
   if create_trendtype_counter == true then
     
     -- Call function to send create request
     result, code, response_header = url_send(trendobject, trendname, 'C', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
     
     -- Calculate results for creation results log
       if result == '{"success":true}' then
         number_of_trends = number_of_trends + 1
       else
         number_failed = number_failed + 1
       end
     
   end
   
   -- Check if trend type 'Counter with negative delta' should be created
   if create_trendtype_counter_with_negative_delta == true then
     
            -- Call function to send create request
     result, code, response_header = url_send(trendobject, trendname, 'D', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
         
     -- Calculate results for creation results log
       if result == '{"success":true}' then
         number_of_trends = number_of_trends + 1
       else
         number_failed = number_failed + 1
       end
     
   end
   
   -- Check if trend type 'Absolute value' should be created
   if create_trendtype_absolute_value == true then
            
     -- Call function to send create request
     result, code, response_header = url_send(trendobject, trendname, 'G', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
         
     -- Calculate results for creation results log
       if result == '{"success":true}' then
         number_of_trends = number_of_trends + 1
       else
         number_failed = number_failed + 1
       end
     
   end
   
 end
 
end
   
if number_failed == 0 then
    log ("Created " .. number_of_trends .. " trends succesfully")
else
    log ("Created " .. number_of_trends .. " trends succesfully and creation of " .. number_failed .. " trends failed")
end

-- Disable script when done automaticly
script.disable(_SCRIPTNAME)

---

Here is a script to batch export last month trend data as csv and send by mail (with trend selection) for new (and relaese candidate) FW.

Code:

--**************************************************************************--
--** Email trendlog data as CSV attachment created by Erwin van der Zwart **--
--************ For HL from FW 1.5 and SL from FW 1.2 with NGINX ************--
--**************************************************************************--
--*************************** Start of parameters **************************--
-- Version 1.1 *************************************************************--

--Gmail (smtp) username !IMPORTANT!
user = 'YOUR EMAIL ADRESS'

--Gmail (smtp) password !IMPORTANT!
password = 'YOUR PASSWORD'

--Sender for e-mail
from = '<' .. user .. '>'
alias_from = 'YOUR ALIAS'

--Recipient for e-mail
to = '<receiver@domain.com>'
alias_to = 'receiver'

--Subject for e-mail
subjectpart1 = 'Trend export file'
subjectpart2 = 'automaticly send by homeLYnk'

--Message on bottom of email (will only be showed when client don't understand attachment)
epilogue = 'End of message'

--Set export mode (selected trend(s) or all trends)
export_all = true

--Set trend names if not all trends need to be exported (only used when export_all = false)
trendnames = {
 "Total Electric Usage",
 "Total Water Usage",
 "Total Gas Usage",
}

--**************************************************************************--
--**************************** End of parameters ***************************--
--**************************************************************************--
--****************** DON'T CHANGE ANYTHING UNDER THIS LINE *****************--
--**************************************************************************--

require('trends')

-- Get all trend names from DB
trends_table = db:getall('SELECT name FROM trends ORDER BY name DESC')

-- Check if all trends or selection neeed to be exported
if export_all == false then
 -- Loop through trends_table
 i = 1
for _, trend_names in ipairs(trends_table) do
   delete_from_table = true
   -- Loop through trendnames
   for _, trendname in ipairs(trendnames) do
     if trendname == trend_names.name then
   delete_from_table = false
     end
   end
   if delete_from_table == true then
     table.remove(trends_table, i)
 end
 i = i + 1
 end
end

-- Check if the is at least 1 trend to be exported
if #trends_table < 1 then
 log("No trends available, Could not export trends")
 return
end

-- csv buffer
buffer = {}

-- Add to buffer
table.insert(buffer, '"This file contains the export data of ' .. #trends_table .. ' trend(s) and is automaticly created on ' .. os.date("%A",os.time()) .. ' ' .. os.date("%d-%m-%y at %H:%M") .. '"')
-- Add empty line
table.insert(buffer, '""')

-- months
local months = { "Januari", "Februari", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" }

-- Loop through trends_table
for _, trend_names in ipairs(trends_table) do
 -- Grab trend name from DB table
 trend_name = trend_names.name
 
 -- Add to buffer
 table.insert(buffer, '"##### START OF TREND ' .. _ .. ': ' .. trend_name .. ' #####"')
 -- Add empty line
 table.insert(buffer, '""')

-- Get current timestamp
 timestamp = os.time()
startpoint = os.date('*t', timestamp)
endpoint = os.date('*t')

-- Reset to first of month
startpoint.sec = 0
startpoint.min = 0
startpoint.hour = 0
startpoint.yday = startpoint.yday - (startpoint.day -1)
startpoint.day = 1
startpoint.wday = 1

endpoint.sec = 0
endpoint.min = 0
endpoint.hour = 0
endpoint.yday = endpoint.yday - (endpoint.day -1)
endpoint.day = 1
endpoint.wday = 1

-- Get data for the past month
dates = {}
 dates['start'] = startpoint
 
 if dates['start'].month == 1 then
 dates['start'].month = 12
   dates['start'].year = dates['start'].year - 1
 else
   dates['start'].month = dates['start'].month - 1
 end
 
 dates['end'] = endpoint
 dates['end'].month = dates['start'].month + 1
 
 -- Set resolution to dayly data
 resolution = 86400
 
 -- Get last month for data by each days in this month
 trenddatamonth = trends.fetch(trend_name, dates, resolution)
 
 -- Get last month total avarage data
 trenddatamonthavg = trends.fetchone(trend_name, dates, resolution)
 
 -- Add to buffer
 table.insert(buffer, '"Export of the average usage of the month ' .. months[dates['start'].month] .. ' from trend ' .. trend_name .. '"')
 -- Add empty line
 table.insert(buffer, '""')
 -- Add header
 table.insert(buffer, '"Start date","End Date","Average month value"')
 -- Add to buffer
 table.insert(buffer, '"01-' .. string.format("%02d", dates['start'].month) .. "-" .. dates['start'].year .. '","' .. #trenddatamonth .. '-' .. string.format("%02d", dates['start'].month) .. "-" .. dates['start'].year .. '","' .. trenddatamonthavg .. '"')
 -- Add empty line
 table.insert(buffer, '""')
 -- Add to buffer
 table.insert(buffer, '"Detailed export of the daily usage of the month ' .. months[dates['start'].month] .. ' from trend ' .. trend_name .. '"')
 -- Add empty line
 table.insert(buffer, '""')
 -- Add header
 table.insert(buffer, '"Weekday","Date","Average day value"')
 for _, row in ipairs(trenddatamonth) do
   stamp = dates['start'].year .. '-' .. dates['start'].month .. '-' .. string.format("%02d", _)
local y, m, d = stamp:match("(%d+)%-(%d+)%-(%d+)")
local t = { year = y, month = m, day = d}  
   -- format csv row
   csv = string.format('%q,%q,%q', os.date("%A",os.time(t)), "" .. string.format("%02d", _) .. "-" .. string.format("%02d", dates['start'].month) .. "-" .. dates['start'].year, row)
   -- add to buffer
   table.insert(buffer, csv)
 end
 -- Add empty line
 table.insert(buffer, '""')
 -- Add header
 table.insert(buffer, '"##### END OF TREND ' .. _ .. ': ' .. trend_name .. ' #####"')
 -- Add empty line
 table.insert(buffer, '""')
end

--Create table to include mail settings
local settings = {
   from = from,
   rcpt = to,
   user = user,
   password = password,
   server = 'smtp.gmail.com',
   port = 465,
   secure = 'sslv23',
}

--Create attachment inside FTP server
src = 'Trend Export '.. os.date('%Y-%m-%d %H#%M#%S') .. '.csv'
dst = '/home/ftp/' .. src
io.writefile(dst, buffer)

--Create subject
subject = subjectpart1 .. ": " .. src .. " " .. subjectpart2

--Load required modules to send email with attachment
local smtp = require("socket.smtp")
local mime = require("mime")
local ltn12 = require("ltn12")

--Create e-mail header
settings.source = smtp.message{
headers = {
         from = '' .. alias_from .. ' ' .. from .. '',
         to = '' .. alias_to .. ' ' .. to .. '',
         subject = subject
},

--Load attachment inside body    
body = {
preamble = "",
[1] = {  
       headers = {
          ["content-type"] = 'text/plain',
          ["content-disposition"] = 'attachment; filename="'..src..'"',
          ["content-description"] = '.. src ..',
          ["content-transfer-encoding"] = "BASE64",
       },
       body = ltn12.source.chain(
         ltn12.source.file(io.open(dst, "rb")),
         ltn12.filter.chain(
         mime.encode("base64"),
         mime.wrap()
       )
     )
   },
     epilogue = epilogue
 }
}

--Send the email
r, e = smtp.send(settings)

--Create alert when sending gives an error with error message
if (e) then
 log (e)
 log (r)
 alert("Could not send email: ", e, "\n")
end

--Delete created temp csv file from ftp folder inside HL
os.remove(dst)

BR,

Erwin van der Zwart

[admin]

Nice work Erwin, in your first script you can replace IP with 127.0.0.1 and remove "if-json" call.

[Erwin van der Zwart]

Nice work Erwin, in your first script you can replace IP with 127.0.0.1 and remove "if-json" call.

Thanks for the tip, i changed it in the sample script (;

BR,

Erwin

[Pawel]

Thanks Erwin, those scripts save me a lot of time. I made a small change and all objects with specific tag will have own trend: 

Code:

-- Batch adding trends - Created by Erwin van der Zwart - Schneider Electric Netherlands -----------
-- For spaceLYnk FW 1.2.1 or higher and homeLYnk FW 1.5.1 or higher --------------------------------
-- Refresh browser after creation to show the trends -----------------------------------------------
----------------------------------------- Start Parameters -----------------------------------------




-- Create trend to object with this tag 
tag_name = "make_trend"

-- Set username and password for access to HL
username = 'admin'
password = 'admin'

-- Select trend type to create (or multiple types on same object)
create_trendtype_counter = true
create_trendtype_counter_with_negative_delta = true
create_trendtype_absolute_value = true

-- Set trend precicion (!Important! Can only be these values: 0 to 8)
trendprecision = 0

-- Set trend resolution (!Important! Can only be these values: 5 / 10 / 15 / 20 / 30 / 60 minutes))
trendresolution = 15

-- Set trend count resolution (!Important! Can only be these values: '30' = 30 days, '180' = 180 days, '365' = 1 year, '730' = 2 years, '1825' = 5 years
trendcountresolution = 365

-- Set trend count days (!Important! Can only be these values: '1' = 1 year / '2' = 2 years / '5' = 5 years / '10' = 10 years)
trendcountdaily = 10

-- Set show always 0 base line 
trendshowzero = 0 -- 0 = disabled 1 = enabled

------------------------------------------ End Parameters ------------------------------------------
------------------------------ DON'T CHANGE ANYTHING UNDER THIS LINE -------------------------------
-- Load modules
require('json')
require('socket.url')
require('socket.http')

-- Set HL ip address as localhost
ip = '127.0.0.1'


-- Create url for trend creation
url = 'http://' .. username .. ':' .. password .. '@' .. ip .. '/scada-main/trends/save'

-- Function to send request to create trend
function url_send(trend_object, trend_name, trend_type, trend_resolution, trend_precision, trend_count_resolution, trend_count_daily, trend_show_zero, trend_id)
  local trend = {
      object = trend_object,
      name = trend_name,
      type = trend_type,
      resolution = trend_resolution,
      precision = trend_precision,
    count_resolution = trend_count_resolution * 12 * 24, -- nr of days * nr of points in a hour at min resolution (60/5 = 12) * hours per day
    count_daily = trend_count_daily * 365, -- nr of days * 365 days a year
      show_zero = trend_show_zero,
      id = trend_id,
    }
  data = json.encode(trend)
    form_data = 'data=' .. socket.url.escape(data)
    socket.http.TIMEOUT = 15   
    local res, code, response_header = socket.http.request(url, form_data)
  return res, code, response_header
end

-- Set counters for creation log
number_of_trends = 0
number_failed = 0
objectwithtag = grp.tag(tag_name)
-- Loop for each group adress with specific tag 

for key, value in pairs(objectwithtag) do
  
  -- Get current group address from loop 
  current_GA = knxlib.decodega(value.id)
  
  -- Get current object info
  objectinfo = grp.find(current_GA)
    
  -- Check if object excists
  if objectinfo ~= nil then
      
    -- Set parameters for request
    trendobject = objectinfo.id
    trendname = objectinfo.name
    trendid = ''
    
    -- Check if trend type 'Counter' should be created
    if create_trendtype_counter == true then
      
      -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'C', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
      
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
    -- Check if trend type 'Counter with negative delta' should be created
    if create_trendtype_counter_with_negative_delta == true then
      
            -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'D', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
          
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
    -- Check if trend type 'Absolute value' should be created
    if create_trendtype_absolute_value == true then
            
      -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'G', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
          
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
  end
  
end
    
if number_failed == 0 then
    log ("Created " .. number_of_trends .. " trends succesfully")
else
    log ("Created " .. number_of_trends .. " trends succesfully and creation of " .. number_failed .. " trends failed")
end

-- Disable script when done automaticly
script.disable(_SCRIPTNAME)

[Domoticatorino]

What kind of script is this? User library?
Thanks.

[Daniel]

What kind of script is this? User library?
Thanks.

Any kind of script. You just have to run it once.

[Domoticatorino]

Thanks Erwin, those scripts save me a lot of time. I made a small change and all objects with specific tag will have own trend: 

Code:

-- Batch adding trends - Created by Erwin van der Zwart - Schneider Electric Netherlands -----------
-- For spaceLYnk FW 1.2.1 or higher and homeLYnk FW 1.5.1 or higher --------------------------------
-- Refresh browser after creation to show the trends -----------------------------------------------
----------------------------------------- Start Parameters -----------------------------------------




-- Create trend to object with this tag 
tag_name = "make_trend"

-- Set username and password for access to HL
username = 'admin'
password = 'admin'

-- Select trend type to create (or multiple types on same object)
create_trendtype_counter = true
create_trendtype_counter_with_negative_delta = true
create_trendtype_absolute_value = true

-- Set trend precicion (!Important! Can only be these values: 0 to 8)
trendprecision = 0

-- Set trend resolution (!Important! Can only be these values: 5 / 10 / 15 / 20 / 30 / 60 minutes))
trendresolution = 15

-- Set trend count resolution (!Important! Can only be these values: '30' = 30 days, '180' = 180 days, '365' = 1 year, '730' = 2 years, '1825' = 5 years
trendcountresolution = 365

-- Set trend count days (!Important! Can only be these values: '1' = 1 year / '2' = 2 years / '5' = 5 years / '10' = 10 years)
trendcountdaily = 10

-- Set show always 0 base line 
trendshowzero = 0 -- 0 = disabled 1 = enabled

------------------------------------------ End Parameters ------------------------------------------
------------------------------ DON'T CHANGE ANYTHING UNDER THIS LINE -------------------------------
-- Load modules
require('json')
require('socket.url')
require('socket.http')

-- Set HL ip address as localhost
ip = '127.0.0.1'


-- Create url for trend creation
url = 'http://' .. username .. ':' .. password .. '@' .. ip .. '/scada-main/trends/save'

-- Function to send request to create trend
function url_send(trend_object, trend_name, trend_type, trend_resolution, trend_precision, trend_count_resolution, trend_count_daily, trend_show_zero, trend_id)
  local trend = {
      object = trend_object,
      name = trend_name,
      type = trend_type,
      resolution = trend_resolution,
      precision = trend_precision,
    count_resolution = trend_count_resolution * 12 * 24, -- nr of days * nr of points in a hour at min resolution (60/5 = 12) * hours per day
    count_daily = trend_count_daily * 365, -- nr of days * 365 days a year
      show_zero = trend_show_zero,
      id = trend_id,
    }
  data = json.encode(trend)
    form_data = 'data=' .. socket.url.escape(data)
    socket.http.TIMEOUT = 15   
    local res, code, response_header = socket.http.request(url, form_data)
  return res, code, response_header
end

-- Set counters for creation log
number_of_trends = 0
number_failed = 0
objectwithtag = grp.tag(tag_name)
-- Loop for each group adress with specific tag 

for key, value in pairs(objectwithtag) do
  
  -- Get current group address from loop 
  current_GA = knxlib.decodega(value.id)
  
  -- Get current object info
  objectinfo = grp.find(current_GA)
    
  -- Check if object excists
  if objectinfo ~= nil then
      
    -- Set parameters for request
    trendobject = objectinfo.id
    trendname = objectinfo.name
    trendid = ''
    
    -- Check if trend type 'Counter' should be created
    if create_trendtype_counter == true then
      
      -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'C', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
      
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
    -- Check if trend type 'Counter with negative delta' should be created
    if create_trendtype_counter_with_negative_delta == true then
      
            -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'D', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
          
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
    -- Check if trend type 'Absolute value' should be created
    if create_trendtype_absolute_value == true then
            
      -- Call function to send create request
      result, code, response_header = url_send(trendobject, trendname, 'G', trendresolution, trendprecision, trendcountresolution, trendcountdaily, trendshowzero, trendid)
          
      -- Calculate results for creation results log
        if result == '{"success":true}' then
          number_of_trends = number_of_trends + 1
        else
          number_failed = number_failed + 1
        end
      
    end
    
  end
  
end
    
if number_failed == 0 then
    log ("Created " .. number_of_trends .. " trends succesfully")
else
    log ("Created " .. number_of_trends .. " trends succesfully and creation of " .. number_failed .. " trends failed")
end

-- Disable script when done automaticly
script.disable(_SCRIPTNAME)

Hi Pawel,
in this case don't you create .csv file?
Thanks.

[Erwin van der Zwart]

No this script creates automaticaly trends attached to objects, way faster then creating them by hand (:

BR,

Erwin

[Domoticatorino]

Got it! Thanks.

[PassivPluss]

Hi
This script lacks the aggregate function. Could you update the script? Is there a function to delete all trends via script?

[admin]

You can add aggregation parameter to the function arguments and trend parameter table. Possible values are MIN, MAX, LAST and AVERAGE.

To delete a certain trend, replace "save" with "delete" in URL and pass trend ID like this, where 123 is the ID you want to delete.

Code:

data = json.encode({ id = 123 })

[Trond Hoyem]

Hi

I am using a somewhat minimized version of this script. I have used it many times before, but today it wont work. I get the error 'Host not found'. I was thinking it was because I had set the IP address and password wrong in my first attempt, but no... still after changing, it did not work. Any idea where to look for errors?

I have the script in a Wiser FW 2.7.0 it that is important...

My script is this one:

Code:

require('json')
require('socket.url')
require('socket.http')

-- parameters
daily = 365*24*60 -- 1 day
daily1year = 365*24*12 -- 365 day
daily2year = 2*365*24*12 -- 365 day
year5_d = 5*365 -- 5 year
tag = 'nyNyTrend'

obj = grp.tag(tag)


for _, addr in ipairs(obj) do

  object = addr.address
  alias = addr.name

  trend = {
    object = knxlib.encodega(object), -- object id in db
    name = alias, -- trend name
    type = trend_type,
    resolution = 5, -- every 5 minute
    precision = 2, -- floating point precision
    count_resolution = 365*24*12, -- 1 year
    count_daily = 5*365 -- 5 years
  }

  data = json.encode(trend)
  post = 'data=' .. socket.url.escape(data)
  grp.removetags(addr.name, tag)

  res, err = socket.http.request('http://admin:qSHs5FAcfY@HRdn@192.168.68.249/scada-main/trends/save', post)
  log(res, err)

end




script.disable(_SCRIPTNAME)

[admin]

Host not found is usually a DNS error. Are you trying to do a request to a remove device or to a local one? For local requests you should use 127.0.0.1 as the IP address.

[Trond Hoyem]

Host not found is usually a DNS error. Are you trying to do a request to a remove device or to a local one? For local requests you should use 127.0.0.1 as the IP address.

I did use the IP address of the device. I have changed it to 120.0.0.1, and now the error is timeout.

[admin]

Not 120 but 127.0.0.1