This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Modbus and RS485 communications
#1
Hello,
in the past I used LM only as the gateway to KNX + visualization.
I used basic scripts in LUA.

Now I get to the project, where MODBUS communication and RS485 communication is needed. I went through the forum and still do not know how to do it.

Are there any examples of crypts for RS485 communication and Modbus communication or manual?

The Modbus-TCP communication will be used to control the massage bathtub.
RS485 communication will be used to control the fireplace.

I have communication protocols for the device.
I have LM5 IO V2 available.

Thank you for your help.
Reply
#2
The easiest way to interface modbus devices is to use profiles/built-in mapper: http://openrb.com/docs/modbus.htm
Serial communication library is also built-in: http://openrb.com/docs/serial.htm

There's also an example of Denver e-Ribbon Fire control: http://openrb.com/logicmachine-as-gatewa...ibbon-fire
Reply


Forum Jump: