This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Doorbell 2N IP (Intercom)
I am a novice in scripting. 
Is there Anyone that can help me in reading out my doorbell status to link to object in KNX?

My Dorrbell is the 2N IP Verso and it has its own HTTP API (Testtool).
I need the status of the relay switch or the validation of the rfid card. Both would work. 

My goal is following problem:
If the relay switch status of the doorbell turns to 'true' then the knx group adresss (boolean) should write to 'true'.

I can start with "https://<ip-adress>/api/switch/status?switch=1"  an request from the doorbell. The doorbell uses TLS and the type "digest" for https.
The response is:

  "success" : true,
  "result" : {
    "switches" : [
        "switch" : 1,
        "active" : false,
        "locked" : false,
        "held" : false

With the automation manual for the http request it is possible to send an request from the doorbell.

Is there already a solution for my question/problem?

Attached Files Thumbnail(s)
I've got my solution:

I activate the remote service and use the remote http code:


I just used it in the automation of the 2N IP Doorbell. Just stupid i am.
How simple...

Works fine for me!

Forum Jump: