This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Scripting v
Restore value on power loss

Threaded Mode
Restore value on power loss
djaval Offline
Junior Member
Posts: 22
Threads: 6
Joined: Dec 2023
Reputation: 0
#1
02.02.2024, 05:51
Hi!

Please advice how to save some values to memory, to be able to restore them after power-loss and reboot?
Does values in storage saved? How to sync storage to disk?
Find
Reply
admin Offline
Administrator
Posts: 7309
Threads: 41
Joined: Jun 2015
Reputation: 419
#2
02.02.2024, 07:06
Storage and main database are saved to the SD card every 30 minutes. Normal reboot via UI performs saving before the system is restarted. If a power loss happens then the latest values might be lost. You should install a UPS if there are frequent power outages.
Find
Reply
djaval Offline
Junior Member
Posts: 22
Threads: 6
Joined: Dec 2023
Reputation: 0
#3
02.02.2024, 09:25
(02.02.2024, 07:06)admin Wrote: Storage and main database are saved to the SD card every 30 minutes. Normal reboot via UI performs saving before the system is restarted. If a power loss happens then the latest values might be lost. You should install a UPS if there are frequent power outages.

Is there a command to manually save storage to SD card?
Find
Reply
admin Offline
Administrator
Posts: 7309
Threads: 41
Joined: Jun 2015
Reputation: 419
#4
02.02.2024, 10:28
You can do this manually from the main UI by clicking "Sync project data". Using this too often is not recommended as it can degrade the internal SD card quickly.
Find
Reply
djaval Offline
Junior Member
Posts: 22
Threads: 6
Joined: Dec 2023
Reputation: 0
#5
28.03.2024, 15:48
(02.02.2024, 10:28)admin Wrote: You can do this manually from the main UI by clicking "Sync project data". Using this too often is not recommended as it can degrade the internal SD card quickly.

Hi! Is there a way to save data via script command, not via UI?
Find
Reply
Erwin van der Zwart Offline
Senior Member
Posts: 1746
Threads: 6
Joined: Jul 2015
Reputation: 115
#6
31.03.2024, 19:15
Why? The default save interval is there for a reason…
Find
Reply


Forum Jump: