This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

schneider wiser/spacelynk issues
#1
it is the second schneider that behaves in the same way: 
I cannot restore any backups, it does not accept any changes to the project (after a while it returns as before), it does not allow me to reset to factory conditions nor firmware update. Both machines have been working for 4/5 years in different places with different customers. Is it a memory problem? Are they to be replaced?
Reply
#2
Hi,

Sounds like your SD card is switched to read-only. Your SD card probably needs to be replaced.

See:

For spaceLynk: https://download.schneider-electric.com/...AN2_001_SL

For W4K: https://download.schneider-electric.com/...ef=AN2_001

BR,

Erwin
Reply
#3
(09.10.2019, 08:19)Ok, I will check... but how is possible the SD card switch to read-ony by itself?BRPeppeErwin van der Zwart Wrote: Hi,

Sounds like your SD card is switched to read-only. Your SD card probably needs to be replaced.

See:

For spaceLynk: https://download.schneider-electric.com/...AN2_001_SL

For W4K: https://download.schneider-electric.com/...ef=AN2_001

BR,

Erwin
Reply


Forum Jump: