This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

Modbus 32-bit registers

I got an Eaton nzm-xmc-tc-mb, this unit got a 32-bit register with High byte and low byte. I've never worked with this before so im having probles understanding how it works.

I think I understand the logic, but I got no idea how I should pull the data and write it.

Register manual (PDF document):

Can someone explain how this works and maybe give me a starter script to get me going?

Best regards
Marcus H
Just try RTU read test with int32 and see what you get. In Modbus this is normal that you read several registers for single value.
You should create a profile instead of using scripts. See this thread for some examples:

Thanks Daniel, seems like i wasn't that far off after all. I keep getting this error, Resource temporarty unavailable. Is this an LM error or an device error?

I use script only when i want to read values for test, i find this much easier. When i get the values and understand the register i can, make my own register. Thanks for the link Smile
If you use RTU read test then you straight have all the parameters for profile, much simpler for me.

Forum Jump: