Modbus profiles examples

[Sjef de Laat]

Hello everyone,

does anybody have the profile for the energymeter from ABB B23 112-10M?

[CristianAgata]

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

[Tuwat47]

Good morning Community,
I want to share for all user an Caleffi Conteca modbus profile and pdf useful for solve any doubt.

All the contributes are welcome.

Best regards,
Mirko

[Novodk]

Hello everyone,

does anybody have the profile for the energymeter from ABB B23 112-10M?

Did you get the profile for that meter?

[admin]

If you need a profile for ABB B23 112-10M then we can help with creating it.

[CristianAgata]

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

[atomi23]

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

[CristianAgata]

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

Try this

[atomi23]

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

Try this

Thanks for your Work it works now Ok now i have to test it on my installation ( it will take some time becouse of the weather at the moment

[kyriakos@webros.gr]

Hello,
I am trying to connect my Gree Versati IV heat pump with LogicMachine Reactor through Modbus. I can read the values of registers from Read Test button on modbus tab inside the interface of logicmachine. I would like some help to make the rest procedure to get these values on the knx bus.
Thank you.

[Daniel]

Hello,
I am trying to connect my Gree Versati IV heat pump with LogicMachine Reactor through Modbus. I can read the values of registers from Read Test button on modbus tab inside the interface of logicmachine. I would like some help to make the rest procedure to get these values on the knx bus.
Thank you.

Create separate thread for this and we can help you start.

[AlexLV]

Hi,
my basic profile and info I found about Sungrow inverter SH8.0RT-V112.
Will update more a bit later. Also found that some data has different names in pdf file and iSolarCloud app (from Sungrow). Some of data  in iSolarCloud  is just sum of some other parameters.. We can discuss it later, I have a site with this device.

  Communication Protocol of Residential Hybrid Inverter-V1.1.5.pdf (Size: 432.13 KB / Downloads: 10)

  SunGrow_.json (Size: 4.82 KB / Downloads: 11)

BR,

Alexander

[Sjef de Laat]

If you need a profile for ABB B23 112-10M then we can help with creating it.

Hello tank you,

I now made it with your modbus generator and it works perfectly now

[FatMax]

Someone asked for a Profile for PowerTag I/O module.

For the control object, ON = 2. OFF = 1.

For the status object, 0 = false, 1 = true

  Arkitecht_PowerTagIo.json (Size: 383 bytes / Downloads: 9)

[Ranjeet]

Dear Sir ,

We Have Installed KNX System With Logic Machine .Scada Team Wants to Operate Light with Scene Group Address from Modbus RS485 From Logic Machine They Need Mapped group Address, Baud rate, parity, Addresses form us. How do we map 1bit and 1 byte group address to Logic machine. can you provide json profile for light group address where we map that group address.

[Daniel]

Please always create new thread when asking question not related to the topic.
Most likely you need this:
https://kb.logicmachine.net/integration/...tcp-slave/

[provodkapro]

Hi all!
I made and checked the profile for the Haier YCJ-A002 module (for connecting Haier air conditioners via Modbus).
For writing, I used the site https://jsoneditoronline.org/
And modbus profile generator https://forum.logicmachine.net/showthrea...8#pid19678

Hi!

I made almost the same profile, and then found yours. 

I added multiple writes, hid the air conditioner number (according to the documentation it is always 0, so I set the mode to "internal") and changed "bus_datatype" to "temperature" in the corresponding addresses.

[Daniel]

Hi all!
I made and checked the profile for the Haier YCJ-A002 module (for connecting Haier air conditioners via Modbus).
For writing, I used the site https://jsoneditoronline.org/
And modbus profile generator https://forum.logicmachine.net/showthrea...8#pid19678

Hi!

I made almost the same profile, and then found yours. 

I added multiple writes, hid the air conditioner number (according to the documentation it is always 0, so I set the mode to "internal") and changed "bus_datatype" to "temperature" in the corresponding addresses.

Next time use this:
https://forum.logicmachine.net/showthread.php?tid=5911